Each pair typically lasts about 4-6 weeks for most daily glasses wearers. It will vary depending on frequency of use, the environment, the frame material, etc. To get the best lifetime for the product, when applying be sure to clean the frames really well with alcohol first and let it fully dry and also make sure hands are clean. It also helps to not to touch the adhesive side when applying the pad if possible, and to not stretch them at all when applying.

Setex nose pads will not work equally on every style and material of eyeglasses. The nose pads are designed for full plastic frames, they will not work with the style of glasses with nose pads that screw-in. They will stick to hard plastic the best, they will not stick well to soft-touch frames.

No, Setex Grip nose pads are designed for full frame plastic glasses and sunglasses only.

Since the pads will contact face oils, makeup, dirt and dust, the easiest way to clean the nose pads is with mild soap and warm water. Be careful of hot water, as it can weaken the adhesive on the nose pad. Pat dry with a cloth, being careful not to rub too hard and pull off the nose pad.

Our nose pads come in three thicknesses: ultra-thin 0.6mm (0.024”), standard 1.0mm (0.04”), and thick 1.8mm (0.07”). Depending on the shape of your face and whether you are looking for a more seamless look, you may choose one over the other. Sizes: Adults 7mm x 16mm and Kids 6mm x 10.88mm

The adhesive on the nose pads will hold up well with mild soap and warm water. We do not recommend using hot water to clean the nose pads.

These pads are not made to stack on top of each other. If you need thicker pads, please try our thick 1.8mm nose pads.

These nose pads are made of a soft TPE (thermoplastic elastomer) material that has been ISO-approved for safe skin contact with no irritation.

No, they do not leave marks on your makeup. They may pick up a bit of the makeup, but can be easily cleaned with mild soap and warm (not hot) water.

The adhesive is strong for everyday use, but is also designed to be easily removed when the pads need to be replaced. The adhesive will not leave a residue, and it is recommended to clean the glasses with rubbing alcohol before new pads are placed on the glasses.

These are designed to fit full frame plastic glasses and apply to the bridge area of the glasses. If our standard nose pads are too large for the area on your glasses, we do make a smaller kid’s version that fits adult eyewear with a smaller bridge area as well.

Yes, our nose pads are designed to fit comfortably and provide a strong grip without putting pressure on the bridge of your nose. Many customers have reported that the nose pads help reduce the red marks that occur on the nose when wearing glasses.

Yes, they are easy to apply by first cleaning your eyewear, peeling off the backing on the adhesive, and then sticking to your glasses. Some people with limited dexterity may find removing the backing a bit challenging, in that case tweezers can help. Detailed instructions are on our Application Instructions page.